This page assumes that you are successfully connected to a VPN server. This guide is meant for the most common setups, so if it doesn't apply to your situation, or doesn't help, see the Support page for guidance. OpenVPN is such a powerful tool with so many options, and computer configurations are so varied, that it is impossible to have an exhaustive troubleshooting guide. If one way or the other solves your problem, you're done! Troubleshooting this problem could be very simple: try connecting the VPN with and without "Set nameserver" selected.
If OpenVPN is connected to the server but your IP address does not change Use a different DNS server only when the VPN is active Use a different DNS server whether or not a VPN is active Enter DNS addresses specified by Internet provider.If OpenVPN is connected to the server but you can't access the Internet Click the Plus ( +) button under DNS Servers box.ī. Router - Enter the desired default gateway address. Subnet Mask - Enter the desired subnet mask.ĭ. IP Address - Enter the desired IP address.Ĭ. Click the Advanced button on the bottom of the Network window.Select Built-in Ethernet from the left-hand menu.Click the Network icon in the Internet & Wireless section.Click the Apple icon on the upper left-hand corner.Manual Configuration: Snow Leopard (10.6) and Leopard (10.5) NOTE: Mac OS X is configured for a DHCP TCP/IP connection by default. This document describes how to manually configure the TCP/IP settings within Mac OS X. This is useful when the Mac computer needs to be remotely accessible, and NAT settings (such as port forwarding or DMZ) have been configured in the router.
This will cause the IP address on the Mac computer to remain the same, and not change. This would include manually configuring the IP Address, Subnet Mask, Default Gateway, and DNS addresses. In some cases, the TCP/IP settings on the Macintosh machine may need to be manually configured for Internet access.
0 kommentar(er)
